How to Add a Camera to Your Reolink RLN8-410 NVR

By Reolink Official: Security Cameras and Systems for Home & Business | Published: 2026-10-20

Category: How-to Guides

Learn how to connect a PoE camera to your Reolink RLN8-410 NVR with this step-by-step guide. Includes setup tips and common mistakes to avoid.

Quick Answer

To add a camera to your Reolink RLN8-410 NVR, physically connect the PoE camera to the NVR's PoE ports or a PoE switch, then use the Reolink app or web interface to detect and pair the device.

Wired vs Wireless: Which Cameras Work with the RLN8-410?

The RLN8-410 is designed for Power over Ethernet (PoE) cameras. It has 8 built-in PoE ports that provide both data and power over a single Ethernet cable. This means wired PoE cameras connect and power up automatically when plugged in.

Wi-Fi cameras are not directly supported via the NVR's PoE ports. However, you can add Reolink Wi-Fi cameras by first connecting them to your local network and then adding them through the NVR's network settings. Note that Wi-Fi cameras may introduce latency and rely on stable router placement.

What You Need Before Starting

Before you begin, make sure you have the following: a Reolink PoE camera (e.g., RLC-810A or Duo 3 PoE), a working RLN8-410 NVR with a pre-installed 2TB HDD, and Ethernet cables. The NVR must be connected to your router via its WAN port for remote access and app functionality.

If you are adding more than 8 cameras, you will need an external PoE switch. The RLN8-410 supports up to 8 channels natively, but additional cameras can be added via the network if you use a switch.

Step-by-Step: Add a Camera to Your RLN8-410 NVR

Step 1: Physically Connect the Camera: Plug one end of an Ethernet cable into the PoE camera and the other end into one of the PoE ports on the back of the RLN8-410 NVR. The camera will power on automatically. A common mistake is using a non-PoE switch or injector that is not compatible with Reolink cameras. Check that the camera's IR LEDs light up or the lens moves during startup to confirm power.
Step 2: Access the NVR Interface: Open the Reolink app on your smartphone or log in to the NVR's web interface via a browser on the same network. The default IP address is usually 192.168.1.xxx. Use the admin credentials printed on the NVR label. A common mistake is forgetting to connect the NVR to your router via the WAN port, which prevents remote access. If you cannot find the NVR on your network, verify the Ethernet cable connection between the NVR and your router.
Step 3: Add the Camera in the App or Web Interface: Navigate to the 'Device' or 'Camera' management section. Click 'Add Device' or the '+' icon. The NVR will scan for connected cameras. Select the detected camera and confirm the pairing. A common mistake is skipping the firmware update prompt, which can cause compatibility issues. Always update the camera firmware when prompted to ensure stable operation and new features.
Step 4: Configure Recording Settings: After the camera is added, set the recording schedule (continuous, motion-triggered, or scheduled) in the NVR settings. The RLN8-410's 2TB HDD supports weeks of footage depending on resolution and frame rate. A common mistake is leaving the default continuous recording on, which fills the HDD faster than needed. For most home users, motion-triggered recording balances storage and coverage.
Step 5: Verify the Feed and Adjust Camera Position: View the live feed in the app or web interface. Adjust the camera angle and focus if needed. Test motion detection by walking in front of the camera. A common mistake is mounting the camera too high or too low, which can reduce detection accuracy. Position the camera at a height of 7-10 feet for optimal field of view and motion detection.

Product Facts

RLN8-410: The Reolink RLN8-410 is an 8-channel PoE NVR that comes with a pre-installed 2TB HDD, enabling continuous 24/7 video recording when paired with Reolink cameras. This means you can start recording immediately after connecting your cameras without needing to buy additional storage.
RLN8-410